Saya hargai penulis artikel ini, Hingga saya merasa, Biarlah apa adanya saja yang dia tulis, tidak perlu lagi saya edit dan tidak perlu lagi memberikan perbaikan ataupun revisi, Ya, menurut saya sudah sangat jelas, tapi tetap, ketelitian dan kehati-hatian, Sangat perlu anda gunakan. untuk mendapatkan hasil yang maksimal, Ingat resiko BRICKED seperti psp3000/2000, Tetap menghantui pada saat pengerjaanya, Silahkan rasakan.. layar blank biru...persis seperti YLOD, duhh...!!!!
Thanks before ZILOT. [Kayaknya saya tahu nih yang buat artikel, Pasti orang Bandung, Belagu bahasa Inggris, blukutuk-blukutuk...]
Kalo susah nyarinya USB Flashdisk ini, dikota anda, Coba kesini, Tapi saya ngga promosiin dia loh, Kebetulan browsing ketemu alamat yang jual usb jenis ini
---------------------------
Before starting the tutorial you are going to need a couple of files:
- DGF.rar (167.48 MB) (Which contains the modified SSP is 3:41 and Lv2diag.self Lv2diag.self FILE FILE 1 and 2)
- 20101208-2-downgrade.rar (Which contains the upgrade and downgrade downgrade.bin P3GO is to put your PS3 in factory / service mode)
- A clean pen formatted to fat32
YOU WILL NOTICE THAT FROM THIS POINT FORWARD I CHANGED THE NAME OF THE DRIVE OF THE MICROSD P3GO AND THAT IS INSIDE THE PLUGGED P3GO TO HELP IDENTIFY THEM BETTER!
OK LET'S DONE THIS FIRST UPGRADE OUR P3GO!
(IMPORTANT: That is users upgraded Their P3GO with the upgrade 26/11/2010 There Is No need to put the file inside the microSD update.bin .. just put the file inside the P3GO to upgrade to V10)
To get the other users who Somehow Have Their Difficulties upgrading P3GO let's do it:
Open up the microSD That it is inside the P3GO like in the pictures:
Copy the file that is inside update.bin the downgrade.rar-20101208-2 file to the microSD like this:
JUST PLUG AND P3GO UnPlug YOUR IT AGAIN AND YOU WILL SEE IN THE PROPERTIES OF THE DRIVE THAT IT IS V10 LIKE THIS:
Now let's copy the file to the downgrade.bin P3GO drive like this:
Congratulations you now Have your P3GO ready to kick some firmware 3:50!
Now let's face the console:
With the console turned off Completely (FAT - The switch in the back and the SLIM with the power cable of the Completely removed) plug your P3GO like in the photo:
Now connect the PS3 like jailbreak: Power + Eject really Quickly and You Will Be Will see you in factory / service mode like this:
Just power off the PS3 via XMB!
Now using the pen to fat32 formatted Will you need to copy the modified SSP 341 for 341 from DGF and Lv2diag.self FILE 1 to clean the pen:
Plug the PEN to the USB PORT that is the most right in your console like the photo:
Power on the console and you WONT SEE ANYTHING IN THE SCREEN OF YOUR TV BUT IT WILL TAKE MORE OR LESS 3 MINUTES TO FLASH THE FIRMWARE 3:41 and AFTER THAT THE PS3 WILL POWER OFF BY Itself!
Now delete ALL THE FILE IN YOUR PEN FAT32 and copy the Lv2diag.self FILE 2 to the pen:
Connect the pen again like this:
Power on the console and after 10 seconds the console Will power off again!
After That power on the console again WITHOUT OR ANY OTHER P3 THE PEN AND YOU WILL SEE CONNECTED THAT YOU ARE IN 3:41
Now just rename or delete the file from downgrade.bin P3GO and You Can use it to jailbreak your PS3!
Have fun!
------------------------------
Jika anda minat membeli yang sudah jadi, Silahkan hubungi saya, Saya jual 550 ribu saja, Untuk DOWNGRADER sekaligus JAILBREAK, Terdiri dari 3 USB Flashdisk. + rincian penggunaannya, [Tutorial teks dan video]
Ingat :
Downgrader ini bisa dipakai berulang-ulang, Bukan hanya untuk satu ps3 saja. dan dipakai untuk mendowngrade Maksimal firmware 3.50. menjadi 3.41 langsung. jika minat downgrade dibawah 3.41 bisa saya buatkan.
Hubungi segera :
rudie777 + yuanita budiman.
MERPATI-PLAYSTATION
Jl.Merpati 36. Monang-Maning DPS-Bali.
[0361] 2735745 - 081558001488
Pin BB : 31765435
